Instructions
Instructions for Using Immacu-10™
For most applications, dilute Immacu-10™ according to the recommendations below. Measure the correct amount of clean water into a spray bottle, add the recommended capful(s) of Immacu-10™, and start cleaning.
If cleaning stains in material such as clothing or carpet, you can often just use the tip of your spray bottle to “rub in” or “agitate” the Immacu-10™ solution, and watch the stain(s) disappear. More stubborn stains will require more Immacu-10™ and/or a stronger solution - you may need to experiment to find the right mix to clean your stain.
A stiff wire brush, toothbrush or scrubbing pad can also be helpful when using Immacu-10™ to clean very hard-to-remove stains or spots. Often, allowing the stain to set in and dry will help in the stain-removal process.
Note: using other cleaners on the stain, before using Immacu-10™, will have an effect on your success, depending on what product is used, how much of the product has been used, how long it has set in, etc. For best results, it is recommended that you use Immacu-10™ by itself, before using other cleaners, to clean your most stubborn stains.
Light Cleaning (makes 108 pints, using 32 ounce bottle)
Add 1 cap Immacu-10™ to one pint water to clean:
| |
|
|
|
General Cleaning (makes 36 pints, using 32 ounce bottle)
Add 3 caps Immacu-10™ to one pint water to clean:
| |
|
|
|
* Regular carpet care: mist Immacu-10 over carpet, let crystallize two or three seconds, then vacuum.
Heavy Duty Cleaning (makes 18 pints, using 32 ounce bottle)
Add 6 caps Immacu-10™ to one pint water to clean:
| |
|
|
|
Order Now
i-10 Group
P.O. Box 219
Madison, TN 37116
(615) 415-8891 phone
(707) 897-8426 fax
info [at] immacu-10 [dot] com



